Cars with a "sedan" body
Fig. 1.195. Procedure for replacing the central high stop lamp bulb
1. Pull out the cores and remove the plastic holders that secure the trunk lid trim panel. Remove the trim panel (fig. 1.195).
2. Disconnect the electrical connector from the light.
3. Turn the lamp holder counterclockwise and remove it from the flashlight housing.
4. Remove the lamp from the socket.
5. Install the new lamp and perform the above operations in reverse order.
Cars with a "hatchback" body
Fig. 1.196. Removing the rear luggage compartment door trim
1. Remove the upper trim panel of the rear tailgate (fig. 1.196).
2. Disconnect the electrical connector from the light.
3. Turn the lamp holder counterclockwise and remove it from the flashlight housing.
4. Remove the lamp from the socket.
5. Install the new lamp and perform the above operations in reverse order.
[The primary source is the website www.MazBook.ru]