Contents: Removal ⇓ Installation ⇓
Warning: Improper maintenance of HID headlights may result in electric shock.
Note: When the ignition switch is turned to the ON position, the operating sound of the headlight leveling actuator may be heard for a few seconds, this is normal because the system operating mode is being checked.
Removal
Disconnect the negative cable from the battery.
Remove the front bumper.
Fig. 7.20. Removing the front combination headlight: 1 – connector; 2 – bolt; 3 – clamp; 4 – lid; 5 – Front combination headlight
Remove in the order shown in Figure 7.20.
Installation
Install in the reverse order of removal.
Adjust the position of the headlight beams.