Vehicle Security Systems Mazda 6 (GG)

Seat belts — general information
Seat belts help reduce the likelihood of serious injury in road accidents and emergency braking of the vehicle. All seats are equipped with diagonal-lap seat belts....

Instructions for using seat belts
Seat belts should be placed on the parts of the body where strong bones are located. The belt should pass over the pelvic bone, chest and shoulder. Avoid placing the lap...

Automatic belt release lock mode
When installing and securing child restraints, it is necessary to switch the reel to the automatic locking mode. This will prevent the child restraint from moving...

Fastening the seat belt (except the center belt in the rear seat)
1. Take the locking bracket in your hand. Fig. 1.129. Pulling out the seat belt: 1 – belt; 2 – locking bracket 2. Smoothly and slowly pull the diagonal lap seat belt out...

Unfastening the seat belt
Fig. 1.131. Seat belt release button: 1 – button Press the button located on the lock (fig. 1.131). If the belt does not retract completely onto the reel, pull the belt...

Height adjustment of the shoulder strap
Fig. 1.132. Diagram of shoulder strap height adjustment Adjust the height of the intermediate bracket if the seat belt strap touches your neck or rests on your arm...

Pyrotechnic pretensioners and load limiters for front seat belts
For more effective protection in the event of an accident, the seat belts installed on the driver and front passenger seats are equipped with pyrotechnic pretensioners...

Rear seat center belt (diagonal lap belt)
Before fastening the diagonal lap seat belt, which is installed in the center position on the rear seat, check that the locking clip (A) is locked in the end buckle (B)....

Cars with sedan and hatchback bodies
Fig. 1.134. Location of the fastening sockets in "sedan" and "hatchback" cars To return the seat belt to its working position, remove the locking clips and slowly pull...

Cars with station wagon bodies
To remove the seat belt, retract it, assemble the locking clips (A) and (C) together and insert them into the mounting socket located under the ceiling. Fig. 1.135....

Airbag and seat belt pretensioner system malfunction indicator
If the airbag system and front seat belt pretensioners are in good condition, the malfunction indicator should come on when the ignition switch is turned to the "ON"...

Child safety
Mazda strongly recommends that when transporting small children in a vehicle, the use of special child restraint systems that ensure passive child safety. We recommend...

Places for installing child restraints
This book provides instructions for attaching child restraints with seat belts for the three most common types of restraints: a cot, a child seat, and an additional seat...

Installation of child restraints
When installing a child restraint system, follow all instructions provided by the manufacturer of the specific product. Installing a Child Restraint System in the Rear...

Installation of child restraints with standard ISOFIX mountings
Your Mazda is equipped with standard ISOFIX anchorages that are designed to accommodate a genuine Mazda child restraint system in the outer rear seating positions. Fig....

General information about airbags
The Supplemental Restraint System (SRS) includes two main subsystems: airbag system with gas generators; electrical system with impact sensors and fault diagnostic...

Front passenger airbag switch
Fig. 1.148. Location of the front passenger airbag activation switch The vehicle is equipped with a front passenger airbag switch. The location of this switch is shown...

Turning off the front passenger airbags
Always check that the front passenger airbag switch is in the correct position before driving. Warning! Do not leave the key in the front passenger airbag switch....

Bringing the front passenger airbags into working condition
1. Insert the key into the front passenger air bag switch slot and turn it counterclockwise to the "ON" position. 2. Remove the key from the switch. 3. Check that the...

Functioning of airbags
If the impact sensors, which are elements of the airbag system, detect a frontal or side impact whose force exceeds a predetermined level, they send an electrical signal...

Conditions for airbag deployment
Deployment of front airbags The front airbags inflate under the conditions listed below. Direct frontal collision of a car with a rigid, non-deformable wall at a car...

Continuous monitoring of the system status
The failure diagnostic system monitors the condition of the following airbag system components: sAS block; airbag module; side impact sensors; pyrotechnic seat belt...

Front airbag/seat belt pretensioner malfunction indicator
If the airbag system and front seat belt pretensioners are in good condition, the malfunction indicator should come on when the ignition switch is turned to the "ON"...

Airbag maintenance
The airbag system does not require regular maintenance. However, if any of the following symptoms occur, contact your authorized Mazda dealer immediately. The airbag...

This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

More sections on repairs of other Mazda models
• User manual: Security systems Mazda3 BK (2003-2009)
• Body: Security systems Mazda CX-5KE (2012-2017)
• Body: Security system SRS Mazda BT-50 (1) (2006-2011)

Share with friends on social networks:

Link in different formats to this section

TEXTHTMLBB Code

Mazda6 GG (2002-2008)