Automotive Security Systems Mazda CX-5 (KE)

Seat belts
1. Rear seat belts. 2. Rear center seat belt. 3. Adjustable anchor. 4. Front seat belt. 5. Front seat belt bracket. 6. Rear seat belt brackets. Seat belts are used to...

Airbag system
1. Curtain airbag module. 2. SAS control unit. 3. Side airbag module. 4. Contact disk. 5. Passenger airbag deactivation indicator. 6. Front passenger airbag module. 7....

Checking seat belts
Checking the condition of the belt tape 1. Make sure the belt is installed correctly without twists or loops. 2. Make sure that there is no damage to the seat belt tape...

Removal and installation front seat belts
Attention. Improper use of front seat belts (seat belt pretensioners) may result in serious injury. The side airbag sensors are installed in the lower part of the...

Removal and installation the adjustable front seat belt anchor
Caution. The side airbag sensors are installed in the lower part of the B-pillars. When working in the area of the B-pillar, disconnect the negative terminal of the...

Removal and installation the front seat belt bracket
1. Turn off the ignition. 2. Disconnect the negative battery terminal and wait at least one minute. 3. Remove the front seat from the vehicle. 4. Disconnect the front...

Removal and installation the rear side seat belts
Please note: The seat belt retractor mechanism must not be disassembled, as reassembly will create excessive play between the internal components of the mechanism, which...

Removal and installation the center rear seat belt
Please note: The seat belt retractor mechanism must not be disassembled, as reassembly will create excessive play between the internal components of the mechanism, which...

Removal and installation the rear seat belt bracket
1. Turn off the ignition. 2. Disconnect the negative battery terminal and wait at least one minute. 3. Press the release button and release the rear centre seat belt...

Checking the seat belt clamp sensor
1. Turn off the ignition. 2. Disconnect the negative battery terminal and wait at least one minute. 3. Remove the appropriate seat belt bracket. 4. Using a tester, check...

Removal and installation the driver's airbag module
Caution: When performing work related to airbag system components, observe all necessary precautions and safety precautions (see section at the beginning of the...

Removal and installation the contact disk
Caution: If the disc of the combination stalk switch is deformed or contaminated with foreign materials, the performance of the steering angle sensor may be reduced,...

Removal and installation the passenger airbag module
Caution: If the driver air bag module is connected to the corresponding wiring, it may become entangled with the horn switch wiring, which may cause damage to the wires....

Removal and installation the side airbag module
Attention. When performing work related to airbag system components, observe all necessary precautions and safety precautions (see section at the beginning of the...

Removal and installation the curtain airbag module
Caution: When performing work related to airbag system components, observe all necessary precautions and safety precautions (see section at the beginning of the...

Removal and installation the SAS control unit
Attention. Incorrect handling of the SAS control unit may result in accidental deployment of the airbag modules and seat belt pretensioners, which may result in serious...

Special tools and accessories

This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

More sections on repairs of other Mazda models
• User manual: Security systems Mazda3 BK (2003-2009)
• User manual: Security systems Mazda6 GG (2002-2008)
• Body: Security system SRS Mazda BT-50 (1) (2006-2011)

Share with friends on social networks:

Link in different formats to this section

TEXTHTMLBB Code

CX-5KE (2012-2017)