Car engine lubrication system Mazda CX-5 (KE)

Technical data
Components of the lubrication system of gasoline engines: 1. Oil dipstick. 2. Oil pressure sensor. 3. Solenoid oil valve. 4. Oil pump components. 5. Oil intake with mesh...

Engine oil (European models)
Petrol engines Diesel engines

Engine oil (except European models)
Petrol engines Note. *1 except for models for China. Diesel engines

Checking the engine oil level
1. Place the vehicle on a level surface. 2. Warm up the engine to operating temperature. 3. Stop the engine and wait at least five minutes before continuing. 4. Remove...

Engine oil change
Attention. A hot engine and engine oil can cause various burns. It is necessary to turn off the engine and wait until it cools down. A vehicle raised on a lift but not...

Replacing the oil filter
Attention. A hot engine and engine oil can cause various burns. It is necessary to turn off the engine and wait until it cools down. A vehicle raised on a lift but not...

Checking oil pressure
Attention. A hot engine and engine oil can cause various burns. It is necessary to turn off the engine and wait until it cools down. A vehicle raised on a lift but not...

Removal and installation an oil radiator
Attention. A hot engine and engine oil can cause various burns. It is necessary to turn off the engine and wait until it cools down. A vehicle raised on a lift but not...

Removal and installation the electromagnetic oil valve
Petrol engine: 1. Solenoid oil valve connector. 2. Oil pressure sensor connector. 3. Oil pressure sensor. 4. Engine electromagnetic oil valve. 5. Gasket. Diesel engine:...

Checking the electromagnetic oil valve
1. Remove the oil solenoid valve from the engine. 2. Make sure the battery is fully charged. 3. Connect the battery to the connector (2 terminals) of the electromagnetic...

Petrol engine oil pan
Removal and installation the oil pan Attention. A hot engine and engine oil can cause various burns. It is necessary to turn off the engine and wait until it cools down....

Diesel engine oil pan
Removal and installation the oil pan 1. Facing casing. 2. Oil pan. Note. : replace the part with a new one after each removal. : apply sealant. Attention. A hot engine...

Oil pump for gasoline engines
Removal and installation the oil pump 1. Oil intake. 2. Oil pump drive chain tensioner. 3. Oil pump sprocket. 4. Oil pump. Note. : replace the part with a new one after...

Diesel engine oil pump
Removal and installation the oil pump Diesel engine: 1. Oil pump sprocket mounting bolt. 2. Oil pump drive chain tensioner. 3. Oil pump sprocket. 4. Oil pump drive...

Special tools and accessories

This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

More sections on repairs of other Mazda models
• Power unit: Lubrication system Mazda Familia 6 (1989-1994)
• Power unit: Lubrication system Mazda Capella 4 (1987-1992)
• Power unit: Lubrication system Mazda3 BK (2003-2009)
• Power unit: Lubrication system Mazda6 GG (2002-2008)
• Power unit: Lubrication system Mazda 121 (3) (1996-2003)

Share with friends on social networks:

Link in different formats to this section

TEXTHTMLBB Code

CX-5KE (2012-2017)