Wheels and tires of the car Mazda CX-5 (KE)
Technical data
Self-adhesive balance weights can be used on the outside of light alloy wheels, which helps to avoid spoiling the appearance of the wheel. For environmental reasons,...
Self-adhesive balance weights can be used on the outside of light alloy wheels, which helps to avoid spoiling the appearance of the wheel. For environmental reasons,...
General procedures with wheels
Installing wheels on a car When installing wheels on a vehicle, tighten the wheel nuts in a cross pattern to a torque of 108-147 Nm. Removal/installing suspension arms...
Installing wheels on a car When installing wheels on a vehicle, tighten the wheel nuts in a cross pattern to a torque of 108-147 Nm. Removal/installing suspension arms...
Initialization of the automatic headlight adjustment system (vehicles with gas discharge headlights)
Note: Initialization of the automatic headlight leveling sensor is required after performing the following operations: Removing the automatic control system sensor....
Note: Initialization of the automatic headlight leveling sensor is required after performing the following operations: Removing the automatic control system sensor....
Preliminary check of wheel alignment angles
Note: Checking the wheel alignment angles is performed on the vehicle in running order: coolant and engine oil are filled to the required level; the spare wheel, jack...
Note: Checking the wheel alignment angles is performed on the vehicle in running order: coolant and engine oil are filled to the required level; the spare wheel, jack...
Wheel angle adjustment
Adjusting the wheel angle 1. Loosen the locknuts of the steering rod ends. 2. Remove the steering gear dust boots. 3. Turn the steering rod ends on both sides of the...
Adjusting the wheel angle 1. Loosen the locknuts of the steering rod ends. 2. Remove the steering gear dust boots. 3. Turn the steering rod ends on both sides of the...
Wheel balancing
Attention. Adjust the imbalance first on the outside of the wheel, then on the inside. Be careful not to scratch the wheel rim. Self-adhesive balance weights (external)...
Attention. Adjust the imbalance first on the outside of the wheel, then on the inside. Be careful not to scratch the wheel rim. Self-adhesive balance weights (external)...
This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
More sections on repairs of other Mazda models
• Chassis: Wheels and tires Mazda Familia 6 (1989-1994)
• Chassis: Wheels and tires Mazda 121 (3) (1996-2003)
• Chassis: Wheels and tires Mazda Familia 6 (1989-1994)
• Chassis: Wheels and tires Mazda 121 (3) (1996-2003)
Link in different formats to this section
TEXTHTMLBB Code
- General information
- Introduction to the guide
- User manual
- Maintenance
- Power unit
- Petrol engines 2.0 l
- Petrol engines 2.5 l
- Diesel engines 2.2 l
- Cooling system
- Lubrication system
- Supply system
- Control system
- Intake and exhaust system
- Engine electrical equipment
- Transmission
- Clutch
- Mechanical gearbox
- Automatic gearbox
- Transfer case
- Drive shafts and cardan
- Chassis
- Wheels and tires
- Front suspension
- Rear suspension
- Brake system
- Steering
- Body
- Exterior (external elements)
- Interior (internal elements)
- Security systems
- Heating and air conditioning
- Electrical equipment
- Equipment and devices
- Electrical circuits