Technical data 1. Transfer case. 2. Right oil seal No.3 of the transfer case. 3. Right oil seal No.2 of the transfer case. 4. Right oil seal No.1 of the transfer case. 5. Transfer case...
Checking the transfer case oil level 1. Place the vehicle on a level surface. 2. Remove the plug with washer from the level check hole. 3. Make sure that the oil level is at the lower edge of the inspection...
Transfer case oil change 1. Remove the front protective tray No.2 from the vehicle. 2. Unscrew the drain plug. 3. Drain the oil into a suitable container. 4. Tighten the plug with a new washer...
Removal and installation the transfer case assembly Attention. Performing the following procedure without first removing the front ABS wheel sensor may cause an accidental open circuit in the wiring. Disconnect the front...
Replacing the left transfer case oil seal 1. Drain the transfer case oil. 2. Remove the transfer case from the vehicle. 3. Insert a flat-head screwdriver wrapped with electrical tape into the edge of the oil...
Replacing the right oil seal No. 1 of the transfer case 1. Remove the right front drive shaft. 2. Insert a flat-head screwdriver into the slot of the transfer case and remove the right oil seal No.1. 3. Using a mandrel and a...
Replacing the right oil seal No. 2 of the transfer case 1. Drain the transfer case oil. 2. Remove the right front drive shaft. 3. Remove the right oil seal No.1 of the transfer case. 4. Insert a flat-head screwdriver wrapped...
Replacing the right oil seal No. 3 of the transfer case 1. Drain the transfer case oil. 2. Remove the right front drive shaft. 3. Remove the right oil seal No.1 of the transfer case. 4. Remove the seal using a flat-head...