Malfunctions in the way of the car Mazda 6 (GG)

Spare wheel and tool kit
The spare wheel and tool in the stowed position are located in the places shown in Figures 1.162 and 1.163. Fig. 1.162. Location of spare wheel and tool kit in cars with...

Mobile jack
Fig. 1.164. Removing the jack (sedan cars) To remove the jack on "sedan" vehicles (fig. 1.164), do the following: remove the cover that covers the jack niche; turn the...

Spare wheel
Mazda vehicles can be equipped with either a small-sized spare wheel or a spare wheel that is unified with the rest of the vehicle's wheels. Spare wheel, unified with...

Replacing a faulty wheel
Note: The following signs may indicate wheel damage: - increasing the resistance to steering wheel rotation; - increased vibration of the car; - the car is pulled to the...

Removal a faulty wheel
1. If your vehicle has decorative wheel covers, remove the wheel cover using a wheel wrench. To do this, press the edge of the wheel cover with the pointed end of the...

Installing a spare tire
1. Use a rag to clean the mating surfaces on the wheel disc and hub, as well as the studs, from dirt. 2. Install the spare tire. 3. Screw the wheel nuts onto the studs...

Engine overheating
If the thermometer indicates that the coolant temperature is too high, or the engine does not develop full power, or the engine operation is accompanied by a loud...

Instructions for starting the engine with an over-rich fuel-air mixture (gasoline engine)
If the engine does not start, the possible cause is an over-enriched fuel-air mixture (an excess amount of fuel entered the engine combustion chambers) and fuel getting...

Starting the engine from an auxiliary battery
Starting the engine from an auxiliary battery can be dangerous if you do not follow the relevant instructions. Therefore, follow the description of all operations...

Car evacuation
Fig. 1.174. Vehicle evacuation methods We recommend that you use only specialized roadside assistance services that belong to official Mazda dealers or operate...

Installing a towing eye on the front of the vehicle
1. Remove the towing eye and wheel lug wrench from the luggage compartment. Fig. 1.175. Removing the plug from the front bumper 2. To avoid damaging the paintwork of the...

Mazda 6 MPS car evacuation
Fig. 1.177. Location of the front mounting socket for the towing eye on Mazda 6 MPS vehicles Fig. 1.178. Installing a towing eye at the rear of Mazda 6 MPS vehicles

This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

More sections on repairs of other Mazda models
• General information: Troubleshooting Mazda Capella 3 (1982-1992, petrol)
• User manual: Faults en route Mazda3 BK (2003-2009)
• Electrical equipment: Troubleshooting Mazda 121 (3) (1996-2003)

Share with friends on social networks:

Link in different formats to this section

TEXTHTMLBB Code

Mazda6 GG (2002-2008)