Warning! When the battery is connected, a flashover may occur between the vehicle body and the B terminal. This may result in injury, fire, or damage to the vehicle's electronic components. Always disconnect the battery before removing the alternator.
Disconnect the cable from the negative battery terminal.
Remove the accessory drive belt.
Remove the front exhaust pipe.
Remove the intermediate shaft.
Fig. 7.7. Removing the generator: 1 – bracket; 2 – connector B; 3 – generator connector; 4 – generator; 5 – heat-insulating cover
Remove the generator in the sequence shown in Figure 7.7.
Install in the reverse order of removal.
