Maintenance operations
Designations in the table:
P – Check: Check, clean, repair, adjust or replace as necessary.
3 – Replace
O – Clear
C – Drain the sediment water
T – Pull up
* Odometer reading or months, whichever comes first.
Note: *1 Also check the condition and tension of the power steering pump and air conditioning compressor drive belts (if present on the vehicle).
Note: *2 Check the spark plug type by the marking on the spark plugs. Refer to the spark plug specifications.
Note: *3 If the vehicle is driven in very dusty conditions, the air filter should be cleaned and, if necessary, replaced more frequently than specified in the table. Consult your authorized Mazda dealer.
Note. *4 The timing belt must be replaced every 240,000 km of vehicle mileage or 10 years. Failure to comply with this requirement may result in engine failure.
Note. *5 If the vehicle is subject to at least one of the following conditions, it is necessary to replace the engine oil and oil filter every 10,000 km or more. Consult the service station of an authorized Mazda dealer.
- - High dust content in the air.
- - Prolonged engine idling or prolonged vehicle movement at low speed.
- - Long-term operation at low ambient temperatures or regular short-distance travel (when the engine does not have time to warm up to normal operating temperature).
The original text is published on Mazbook
Note: *6 If there is a mark "FL22" on or near the radiator cap, use FL22 grade coolant. When replacing the coolant in the engine cooling system, use FL22 grade coolant.
Note: *7 If the vehicle's brakes are operated under heavy load (for example, with a dynamic driving style, when operating a car in mountainous areas) or in very high humidity conditions, the brake fluid should be replaced annually.