Fig. 8.39. Disconnecting the bumper lock
Pull back the ends of the front bumper (wheel niche) outward to release the bumper lock (Fig. 8.39).
Fig. 8.40. Removing the front bumper: 1 – screw A; 2 – connector A; 3 – screw B; 4 – bolt; 5 – connector B; 6 – front bumper
Remove in the order shown in Figure 8.40.
Remove the front bumper.
Warning! If the front bumper is released only on one side when the bumper falls, it may be damaged. When releasing the front bumper lock, secure the bumper so that it does not fall.
Spread the ends of the front bumper (wheel niches).
Attach the front bumper to the body.
Press the front bumper connectors toward the body to engage them into the bumper locks.
[The article is copied from the resource: MAZBOOK]
Install in the reverse order of removal.