To remove the hood hinge, remove the front fender panel.
To remove the hood lock, remove the grille on the radiator.
To remove the hood release cable, remove the mudguard on the driver's side.
Fig. 8.10. Removing the hood: 1 – hood insulator; 2 – casing seal; 3 – Separation of the seal; 4 – hood; 5 – hood hinge; 6 – hood support; 7 – hood switch connector (with security system); 8 – hood lock; 9 – hood release lever; 10 – hood lock cable
(The original article is posted on: www.MazBook.ru)
Remove in the order shown in Figure 8.10.
Install in the reverse order of removal.
Adjust the position of the hood.