Contents: Removal ⇓ Installation ⇓
Removal
Unhook the radiator grille from the four clamps and remove it.
Remove both headlights.
Raise and support the vehicle.
Unscrew one resonator bolt.
Remove the inner parts of the left and right wings by unscrewing one bolt and removing the parts from the metal protrusions from above.
Remove the plugs from the wing lights. Pull only the plugs, not the wires.
Lower the car.
Unscrew the bumper fasteners on the left and right side of the body and remove the bumper.
Installation
With the help of an assistant, bring the bumper up to the front, align it with the holes and insert it. Make sure that the studs are fully inserted into the body; the ends of the bumper should match the wheel recesses.
Attach the inner wing pieces from the top and secure with bolts from the front.
Check if the bumper is horizontal. Tighten the bumper fasteners to 25 Nm.
Raise and support the vehicle.
Place the plugs on the wing lights and check for tightness.
Screw in the radiator bolt.
Lower the car.
Install both headlights.
Insert and secure the radiator grille.