Internal elements of the body and interior Mazda 121 (3)

Removal and installation the center console
Removal Disconnect the negative cable from the battery with the ignition off. Note: This will erase the data from the electronic memory blocks. See instructions in...

Removal and installation the interior rearview mirror
Removal Using a thin nylon cord, separate the adhesive bond between the mirror base and the black area on the front glass. Remove the mirror. Installation Caution: Do...

Pyrotechnic seat belt tensioner
The seat belt tensioners (1) are installed on both front seats and are firmly connected to the belt buckle. In the event of a frontal collision, they ensure that the...

Removal and installation the front seat
Safety precautions: Read the safety precautions when working with the airbag (see chapter " Steering "). Removal Disconnect the negative cable from the battery with the...

Removal and installation the rear seat
Removal Unscrew the three front mounting screws. Lift the seat cushion at the front and push it back firmly (1) to release the hooks and connections under the seat...

Removal and installation the side trim of the footwell
Removal Remove the rubber seals under the side trim. Using a small screwdriver, pry up the four sliding pins (1) of the mounting clamps under the door frame and behind...

This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

More sections on repairs of other Mazda models
• Body: Interior (internal elements) Mazda Capella 6 (1997-2005, petrol)
• Body: Interior (internal elements) Mazda6 GG (2002-2008)
• Body: Interior (internal elements) Mazda CX-5KE (2012-2017)

Share with friends on social networks:

Link in different formats to this section

TEXTHTMLBB Code