Vehicle Maintenance Mazda 121 (3)
This chapter describes all the maintenance operations that must be carried out according to the maintenance plan. They are combined in various parts of the car. Particular attention is paid to wear parts and the need to use special tools.
It is recommended to check tire pressure, engine oil level, coolant level, etc. at least once every 4-6 weeks. and, if necessary, correct them.
When buying spare parts, you need to know exactly the model code and chassis number of the car, so as not to make a mistake when choosing parts.
For complete confidence when buying spare parts, it is best to take the old part with you and compare it with the new one.
Vehicle maintenance plan
Maintenance should be performed at least once a year. If the vehicle's mileage during this period is more than 15 thousand km, then maintenance should be performed after...
Maintenance should be performed at least once a year. If the vehicle's mileage during this period is more than 15 thousand km, then maintenance should be performed after...
Additional vehicle checks
Every 30 thousand km Diesel engine: Replace fuel filter element. 1.3L engine: check the valve clearance and adjust it if necessary. Every 3 years or 45 thousand km Air...
Every 30 thousand km Diesel engine: Replace fuel filter element. 1.3L engine: check the valve clearance and adjust it if necessary. Every 3 years or 45 thousand km Air...
Engine and exhaust system maintenance
In accordance with the maintenance plan, the following maintenance operations must be carried out: Check and adjust valve clearance. Engine: change oil, check for oil...
In accordance with the maintenance plan, the following maintenance operations must be carried out: Check and adjust valve clearance. Engine: change oil, check for oil...
Checking and adjusting valve clearance
Valve clearance needs to be checked/adjusted for all engines, for 1.25 and 1.4 L engines only every 150 thousand km. The valve clearance on a 1.3 L engine should be...
Valve clearance needs to be checked/adjusted for all engines, for 1.25 and 1.4 L engines only every 150 thousand km. The valve clearance on a 1.3 L engine should be...
Checking the engine oil level
Approximately every 1000 km or before a long trip, you should check the engine oil level and top it up if necessary. The engine should not consume more than 1.0 liter of...
Approximately every 1000 km or before a long trip, you should check the engine oil level and top it up if necessary. The engine should not consume more than 1.0 liter of...
Visual inspection for oil leaks
If the engine is oily and the oil consumption is high, you need to check where the oil is leaking. To do this, check the following places: Open the oil filler cap and...
If the engine is oily and the oil consumption is high, you need to check where the oil is leaking. To do this, check the following places: Open the oil filler cap and...
Engine oil change
Necessary tools: Inspection pit or hydraulic jack and stands. Special tool for unscrewing the oil filter (clamp or strap key). Socket head for unscrewing the oil drain...
Necessary tools: Inspection pit or hydraulic jack and stands. Special tool for unscrewing the oil filter (clamp or strap key). Socket head for unscrewing the oil drain...
Cleaning the oil filler cap
Engine 1.3 l Remove the oil filler cap from the valve cover. Check the gasket for damage. Check the tightness of the engine ventilation hoses on the cover by pulling the...
Engine 1.3 l Remove the oil filler cap from the valve cover. Check the gasket for damage. Check the tightness of the engine ventilation hoses on the cover by pulling the...
Checking the coolant level
Check the coolant level at least once every 4 weeks or before a long trip. Ford Fiesta/Mazda 121 Ford Ka The coolant level of a cold engine (i.e. at a temperature of...
Check the coolant level at least once every 4 weeks or before a long trip. Ford Fiesta/Mazda 121 Ford Ka The coolant level of a cold engine (i.e. at a temperature of...
Checking the cooling system for tightness
Check coolant hoses by squeezing and bending them for cracks, hardened hoses should be replaced. The hoses should not sit short on the fittings. Check the tightness of...
Check coolant hoses by squeezing and bending them for cracks, hardened hoses should be replaced. The hoses should not sit short on the fittings. Check the tightness of...
Checking the concentration of coolant
The following tools are needed for testing: Coolant hydrometer. Necessary details (consumables): Concentrate (antifreeze) for making coolant. For Ford and Mazda...
The following tools are needed for testing: Coolant hydrometer. Necessary details (consumables): Concentrate (antifreeze) for making coolant. For Ford and Mazda...
Adding concentrate (antifreeze)
Example: During measurements, the density of the coolant was obtained, corresponding to its freezing temperature of -10°C. In this case, drain 3.5 liters of coolant from...
Example: During measurements, the density of the coolant was obtained, corresponding to its freezing temperature of -10°C. In this case, drain 3.5 liters of coolant from...
Removal water from the fuel filter/replacing
Diesel engine No special equipment is required. Necessary details: If necessary, a diesel fuel filter. A suitable container is required to collect water. Caution: If...
Diesel engine No special equipment is required. Necessary details: If necessary, a diesel fuel filter. A suitable container is required to collect water. Caution: If...
Replacing the air filter element
No special equipment is required. Parts needed: Air cleaner element. Porous oil separator. Removal Loosen the screws and remove the air filter cover. The picture shows...
No special equipment is required. Parts needed: Air cleaner element. Porous oil separator. Removal Loosen the screws and remove the air filter cover. The picture shows...
Checking poly V-belts
Petrol engine: The poly V-belt is tensioned by an automatic tensioner, so the belt tension does not need to be checked during maintenance. Diesel engine: The tension of...
Petrol engine: The poly V-belt is tensioned by an automatic tensioner, so the belt tension does not need to be checked during maintenance. Diesel engine: The tension of...
Replacing the timing belt
Diesel, petrol engines 1.25/1.4 l Since incorrectly performed work can lead to serious damage to the engine, it is necessary to ensure that the operations are performed...
Diesel, petrol engines 1.25/1.4 l Since incorrectly performed work can lead to serious damage to the engine, it is necessary to ensure that the operations are performed...
Visual inspection of the exhaust system
Raise and support the vehicle. Check the strength of the installation of the fastening clamps. Check the exhaust system for holes, rusted areas and chafed spots using a...
Raise and support the vehicle. Check the strength of the installation of the fastening clamps. Check the exhaust system for holes, rusted areas and chafed spots using a...
Replacing spark plugs/checking electrical connections
Tools needed: Suitable spark plug wrench. Necessary details: Four spark plugs. 1.25/1.4 l engines: lubrication. Caution: Replace spark plugs only when the engine is cold...
Tools needed: Suitable spark plug wrench. Necessary details: Four spark plugs. 1.25/1.4 l engines: lubrication. Caution: Replace spark plugs only when the engine is cold...
Gearbox/Main gear
Visually check for leaks. Check the rubber boots on the drive shafts. Manual transmission: check the oil level. Automatic transmission: check the fluid level, replace...
Visually check for leaks. Check the rubber boots on the drive shafts. Manual transmission: check the oil level. Automatic transmission: check the fluid level, replace...
Checking the rubber boots of the drive shafts
Raise and support the vehicle. Pay attention to traces of grease on the covers (1) and near them. Check the tightness of the clamps (2). Check the cover material for...
Raise and support the vehicle. Pay attention to traces of grease on the covers (1) and near them. Check the tightness of the clamps (2). Check the cover material for...
Manual transmission: checking the oil level
Tools needed: Hex key to remove the oil level check bolt. Materials needed: Transmission oil of the required grade. Support the vehicle so that it is level. Inspect the...
Tools needed: Hex key to remove the oil level check bolt. Materials needed: Transmission oil of the required grade. Support the vehicle so that it is level. Inspect the...
Automatic transmission: checking fluid level/changing fluid and filter
Necessary tools: To replace the fluid (oil): Allen key to unscrew the bolt in the filler hole. Sealing ring for bolt. Filter with new sealing ring. Materials required:...
Necessary tools: To replace the fluid (oil): Allen key to unscrew the bolt in the filler hole. Sealing ring for bolt. Filter with new sealing ring. Materials required:...
Steering/Front Axle
Tie rod ends: check axle and mount, check dust caps. Drive shaft joints: check dust covers. Steering: Check the covers for leaks and damage. Steering: check fluid level,...
Tie rod ends: check axle and mount, check dust caps. Drive shaft joints: check dust covers. Steering: Check the covers for leaks and damage. Steering: check fluid level,...
Checking the steering rod/axle joint dust caps
Raise and support the vehicle in front. Tie rod end Hinge (ball joint) bridge Shine a light on the dust caps from all sides and check for damage, paying attention to...
Raise and support the vehicle in front. Tie rod end Hinge (ball joint) bridge Shine a light on the dust caps from all sides and check for damage, paying attention to...
Checking the steering wheel covers
Raise and support the vehicle from the front. Shine a light on the rubber boots (3) on the left and right and check them for damage, paying attention to traces of grease...
Raise and support the vehicle from the front. Shine a light on the rubber boots (3) on the left and right and check them for damage, paying attention to traces of grease...
Checking Power Steering Fluid
No special equipment is required. Required parts: Automatic transmission fluid to Ford specification ESP-M2C166H. Examination Drive the car for about 15 km to warm up...
No special equipment is required. Required parts: Automatic transmission fluid to Ford specification ESP-M2C166H. Examination Drive the car for about 15 km to warm up...
Brakes, wheels and tires
Check the thickness of the working layer of the front and rear pads. Check the brake fluid level. Check brake lines, hoses, brake cylinders and connections. Replace...
Check the thickness of the working layer of the front and rear pads. Check the brake fluid level. Check brake lines, hoses, brake cylinders and connections. Replace...
Checking the brake fluid level
The brake fluid reservoir is located in the engine compartment. It has two chambers, one for each brake circuit. The reservoir cap has a vent hole that should not be...
The brake fluid reservoir is located in the engine compartment. It has two chambers, one for each brake circuit. The reservoir cap has a vent hole that should not be...
Checking the thickness of brake pads
Mark the position of the wheels on the hubs so that they can be reinstalled in their original positions. Loosen the wheel nuts. Raise and support the car, remove the...
Mark the position of the wheels on the hubs so that they can be reinstalled in their original positions. Loosen the wheel nuts. Raise and support the car, remove the...
Visual inspection of brake lines
Raise and support the vehicle. Clean the brake lines with a chemical cleaner. Caution: Brake pipes are coated with a special protective compound to protect against...
Raise and support the vehicle. Clean the brake lines with a chemical cleaner. Caution: Brake pipes are coated with a special protective compound to protect against...
Replacing brake fluid
Necessary tools: Open-end wrench for air bleed bolts (valves). A container for collecting brake fluid together with a hose for bleeding air. Inspection pit or lift....
Necessary tools: Open-end wrench for air bleed bolts (valves). A container for collecting brake fluid together with a hose for bleeding air. Inspection pit or lift....
This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
More sections on repairs of other Mazda models
• General information: Maintenance Mazda Familia 6 (1989-1994)
• General information: Maintenance Mazda Capella 3 and 4 (1982-1992)
• User manual: Maintenance Mazda3 BK (2003-2009)
• User manual: Maintenance Mazda6 GG (2002-2008)
• General information: Maintenance Mazda CX-5KE (2012-2017)
• General information: Maintenance Mazda Familia 6 (1989-1994)
• General information: Maintenance Mazda Capella 3 and 4 (1982-1992)
• User manual: Maintenance Mazda3 BK (2003-2009)
• User manual: Maintenance Mazda6 GG (2002-2008)
• General information: Maintenance Mazda CX-5KE (2012-2017)
Link in different formats to this section
TEXTHTMLBB Code
- General information
- Introduction to guide
- User manual
- Maintenance
- Power unit
- Engine repair (diesel)
- Cooling and lubrication system
- Fuel injection system
- Intake and exhaust system
- Engine electrical equipment
- Transmission
- Clutch
- Mechanical gearbox
- All-wheel drive system
- Transfer case and gearboxes
- Chassis
- Front suspension
- Rear suspension
- Steering
- Brake system
- Body
- Exterior (external elements)
- Interior (internal elements)
- Heating and air conditioning
- Security system SRS
- Electrical equipment
- Equipment and devices
- Electrical circuits
- General information
- User manual
- Maintenance
- Power unit
- Petrol engine 1.3 l
- Petrol engine 1.25/1.4 l
- Diesel engine
- Lubrication system
- Cooling system
- Ignition system
- Supply system
- Fuel injection (gasoline)
- Fuel injection (diesel)
- Exhaust system
- Transmission
- Clutch
- Car gearbox
- Chassis
- Front suspension
- Rear suspension
- Steering
- Brake system
- Wheels and tires
- Body
- Exterior (external elements)
- Interior (internal elements)
- Doors, windows and locks
- Heating system
- Electrical equipment
- Troubleshooting
- Equipment and devices
- Lighting system
- Power devices
- Electrical circuits