Internal elements of the body and interior Mazda BT-50 1

Removal and installation glass and window lift mechanism of the rear side door
1. Disconnect the cable from the negative terminal of the battery. 2. (Models without electric window lift) Remove the window lift handle. 3. Remove the rear side door...

Removal and installation the front door window lift mechanism
1. Disconnect the cable from the negative terminal of the battery. 2. Remove the following parts from the front door: interior decoration (see section " Interior trim...

Removal and installation the window lift control panel
1. Disconnect the cable from the negative terminal of the battery. 2. Using a screwdriver, disconnect clamp "A". Note: Please wrap the screwdriver with protective tape...

Luggage compartment — removal and installation of trim panels
1. When removing and installing the luggage compartment trim panels, refer to the assembly drawing "Luggage compartment trim panels". Note: The figure shows the removal...

Rear view mirrors
Removal and installation the side rear view mirror 1. Disconnect the cable from the negative terminal of the battery. 2. Remove the inner trim of the side rearview...

Instrument panel — removal and installation
Note: When removing and installing the instrument panel, follow the assembly drawing "Instrument panel", and when disassembling and assembling, follow the assembly...

Center console — removal and installation
1. Remove the gear shift lever handle and transfer case lever. 2. Loosen the screws, disconnect the pins and remove the center console. 3. If necessary, disassemble the...

Removal and installation side interior trims
Note: When using a flat-head screwdriver to release trim fasteners, wrap the screwdriver with protective tape before use to prevent damage to the trim; If necessary,...

Removal and installation roof trim
1. Disconnect the drive from the negative battery terminal. 2. Remove the front pillar trims. 3. Remove the upper B-pillar trims. 4. Remove the rear pillar trims. 5....

Removal and installation floor finishes
1. Disconnect the cable from the negative terminal of the battery. 2. Remove the instrument panel amplifier (see section " Instrument panel "). 3. Remove the lower...

Seat belts
Removal and installation front seat belts Attention: If the front seat belts are not used correctly, the seat belt pretensioner may accidentally activate and injure you...

Removal and installation front seats
1. Disconnect the cable from the negative terminal of the battery. 2. Disconnect the seat drive connector. 3. Remove the covers from the seat mounting bolts, unscrew the...

Removal and installation the rear seat
1. Loosen the mounting bolts and remove the seat cushion. Tightening torque - 16-22 Nm 2. Unscrew the bolts securing the hinges to the seat back. Tightening torque - 35...

This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

More sections on repairs of other Mazda models
• Body: Interior (internal elements) Mazda Capella 3 (1982-1992, petrol)
• Body: Interior (internal elements) Mazda6 GG (2002-2008)
• Body: Interior (internal elements) Mazda CX-5KE (2012-2017)

Share with friends on social networks:

Link in different formats to this section

TEXTHTMLBB Code