2. Using a screwdriver, disconnect the clamp "A".
Note: Wrap the screwdriver with protective tape before use.
3. Detach the clips "IN" And "WITH", by pulling the control panel up and remove the control panel.
Driver side
From the front passenger side
4. Disconnect the connectors from the power window control panel and from the mirror control panel (from the driver's side).
5. Turn away screws and disconnect the panel of switches from furnish.
From the driver's side.
1 - finishing,
2 - switch panel,
3 - screw.
From the front passenger side.
1 - switch,
2 - screw.
6. Installation is made in an order, the return to removal.