Removal and installation the front door window lift mechanism (Mazda BT-50 (1))

1. Disconnect the cable from the negative terminal of the battery.

2. Remove the following parts from the front door:

• interior decoration (see section "Interior trim");
• (models without electric drive) window lift handle;
• door trim panel (see section "Interior trim");
• (models with electric drive) protective screen;
• front door glass.

3. Unscrew the nuts and bolts securing the window lift mechanism (see picture below).

The original article is on: Mazbook

• Tightening torque: 7-10 Nm

4. Carefully remove the window lift mechanism through the access hole.

5. Installation is carried out in the reverse order of removal.