Removing
1. Remove the inner door trim.
2. Lower the window until the glass mounting bolts appear in the frame cutout.
3. Unscrew the lowered glass from the power window, to do this, loosen 2 bolts.
4. Tilt the glass forward and remove the doors from the shaft.
5. Loosen the power window bolts on the door plate. At the power window, also disconnect the electrical wires. Pull the power window out of the lower frame cutout.
Installation
1. Insert the power window into the door and screw it on. If required, connect the plug and set the power window to the position shown.
2. Insert the glass into the door and screw it to the lift 2nd bolts. Normally, door glass does not need to be adjusted.
3. Connect the plug at the power window, if not already connected.
4. Install the door trim.