Car clutch repair Mazda 323 (BG)

General description of the clutch
The clutch consists of a clutch basket with a pressure plate, a driven plate and a drive system. The pressure and driven plates are located on the flywheel. When...

Removal and installation / checking of the clutch
Removal 1. Remove the gearbox, see Chapter Manual gearbox , Chapter Removal and installation the gearbox . 2. Mark the position of the pressure plate on the flywheel...

Removal and installation / checking the clutch release bearing
Removal 1. Remove the gearbox. 2. Cars up to 9/89 and station wagon models: Disconnect the return spring of the clutch release lever on the gearbox housing and remove...

Clutch Pedal/Cable Adjustment
Front-wheel drive models with petrol engine up to 9/89. The clutch drive should be adjusted after each clutch repair and also regularly as part of maintenance. The...

Checking/Adjusting the Clutch Pedal
Hydraulic drive (all models except station wagons and front-wheel drive with petrol engine up to 9/89) The height and play of the clutch pedal should be checked if...

Bleeding air from the clutch drive
Air must be removed from the clutch drive if the clutch pedal does not return to its original position or returns very slowly, if the gears are difficult to engage, and...

This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

More sections on repairs of other Mazda models
• Transmission: Clutch and drive shafts Mazda Capella 6 (1997-2005, petrol)
• Transmission: Clutch Mazda3 BK (2003-2009)
• Transmission: Clutch Mazda6 GG (2002-2008)
• Transmission: Clutch Mazda CX-5KE (2012-2017)
• Transmission: Clutch Mazda BT-50 (1) (2006-2011)

Share with friends on social networks:

Link in different formats to this section

TEXTHTMLBB Code