External and internal elements of the body Mazda 323 (BG)

General description of the body
The body of the MAZDA 323 has a load-bearing structure. The bottom, side parts, roof and wings are welded together. The windshield and rear glass are glued. Therefore,...

Removal and installation the front bumper
9/85 - 9/89 year of issue. 1 - bolt; 2 - bolt; 3 - direction indicators; 4 - nuts; 5 - front bumper; 6 - Front bumper trim Remove the parts in sequence. First disconnect...

Removal and installation the rear bumper
9/85 - 9/89 year of issue. 1 - cladding; 2 - bolt; 3 - nuts; 4 - rear bumper; 5 - bumper cover Remove the parts in sequence. First disconnect the ground cable from the...

Removal and installation the radiator grille
Removal 1. Open the hood. 9/85—9/89. 1. Unscrew the radiator grille mounting bolt. 2. Bend the mounting brackets upwards with a small screwdriver and remove the radiator...

Removal and installation side moldings
Removal 1. Side moldings may be glued, snapped on, or both, depending on the model. The short piece on the front fender on vehicles with 9/85 by 8/89 g. issue. it is...

Removal and installation the front wing
MAZDA 323 since 10/89. Removal 1. Change the position of the wheel disk relative to the hub so that the balanced wheel can be installed in its original position. 2....

Outside mirror
MAZDA 323 since 10/89. 1 - overlay; 2 - drive lever; 3 - overlay; 4 - outside mirror; 5 - inner door trim; 6 - mirror drive electric wire; 7 - instrument panel; 8 -...

Removal and installation mirror glass
Removal 1. Heat the mirror glass with a hair dryer. 2. Carefully push the mirror away from the frame. To do this, insert a wide spatula between the glass and the frame....

Instrument panel / center console
MAZDA 323 since 10/89. 1 - rear ashtray; 2 - rear console; 3 - front console; 4 - small console; 5 - side panels; 6 - lower lining; 7 - steering wheel; 8 - fastening...

Front seats
MAZDA 323 since 10/89. 1 - seat heating plug; 2 - rear seat adjustment trim; 3 - front seat

Removal and installation the rear seat
Removal 1. Fold the back of the rear seat forward by pressing the two buttons on the top of the back. 2. Unscrew the hinges and remove the back. 3. Release the fastening...

Back seat
MAZDA 323 Compact/Hatchback since 10/89. 1 - back seat; 2 - rear side trim; 3 - back of the rear seat; 4 - rear trunk trim; 5 - side trim of the trunk; 6 - side trim of...

This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

More sections on repairs of other Mazda models
• Body: Body elements Mazda3 BK (2003-2009)

Share with friends on social networks:

Link in different formats to this section

TEXTHTMLBB Code