Contents: Removal ⇓ Installation ⇓
Removal
1. Open the hood.
9/85—9/89.
1. Unscrew the radiator grille mounting bolt.
2. Bend the mounting brackets upwards with a small screwdriver and remove the radiator grille.
"Universal"
1. Unscrew the radiator grille mounting bolt.
2. Compress the 5 fastening clips with a screwdriver and remove the radiator grille.
Since 10/89 issue.
1. Unscrew the mounting bolt in the middle at the top.
2. If you need to remove both decorative grille trims, first remove the turn signals. Unscrew the decorative trims on the left and right. Remove clamp "2", having first unscrewed the cross-head screw.
3. Compress 4 or 5 fastening clips and pull the radiator grille out.
Installation
1. Since 10/89: Check the strength of the mounting brackets on the radiator grille; replace damaged brackets.
[The article is reprinted from the portal MazBook]
2. If removed, screw on the lower grille trims, insert the clip and screw in the Phillips screw. Install the turn signals.
3. Install the radiator grille, align the holders with the holes. Press the radiator grille until the brackets snap into place.
4. Screw in the mounting bolt(s).