Attention. Observe safety measures when working with the engine cooling system.
1. Disconnect the negative battery terminal.
2. Remove the front protective tray No. 1 of the engine.
3. Drain the coolant.
4. Remove the decorative engine cover.
5. Remove the air filter with hoses and air intake.
6. Remove the expansion tank of the cooling system.
7. Remove the radiator fan.
8. Remove the lower radiator hose.
1. Lower radiator hose.
2. Upper radiator mounting brackets.
3. Radiator.
Attention. To prevent damage to the hooks on the upper radiator mounting supports, do not apply excessive force to them.
9. While lightly pressing the hook of the upper radiator mounting support in the direction of the arrow in the figure, remove the upper radiator mounting bracket towards the rear of the vehicle.
Note: To prevent damage to the radiator fins, cover the radiator with cardboard.
10. Lift the heatsink out of the housing panel mounting holes.
11. Move the radiator with the condenser towards the engine.
12. Remove two bolts (from the underside) fixing the condenser to the radiator.
Versions with petrol engines
Versions with diesel engines
13. Remove two bolts (from the top side) fixing the condenser to the radiator.
14. To take a radiator up from a motor compartment.
15. Installation is made in an order, the return to removal.
16. Fill the system with coolant.
17. Check the tightness of the cooling system.