1. Radiator fan motor connectors.
2. Wiring harness.
3. Upper radiator hose.
4. Radiator fans assembly.
5. Radiator fan No.1.
6. Radiator fan No.2.
7. Radiator fan motor No.1.
8. Radiator fan motor No.2.
9. Radiator casing.
Attention: Observe safety precautions when working with the engine cooling system.
1. Disconnect the negative battery terminal.
2. Drain the engine coolant.
3. Remove the decorative engine cover.
4. Remove the air filter with hoses and air intake.
5. Remove the expansion tank of the cooling system.
6. Disconnect the radiator fan connectors.
7. Remove the radiator fan wiring harness.
8. Remove the bracket shown in the figure from the throttle body and move the upper radiator hose to the side.
9. Remove the radiator fans as an assembly upwards from the engine compartment.
Versions with petrol engines
Versions with diesel engines
10. Remove fan impeller No.1 or No.2.
11. Remove the desired radiator fan motor from the fan shroud.
(Based on website data: «mazbook.ru»)
12. Installation is carried out in the reverse order of removal.
13. Fill the system with coolant.
14. Check the tightness of the cooling system.