Detailed specifications of the automatic transmission Depending on the vehicle configuration, an automatic, planetary three-speed Jabco type F3A gearbox with a hydraulic gearshift drive, combined with a differential and a...
Cross section of an automatic transmission Cross section of automatic transmission: 1 - gearbox housing; 2 - front clutch; 3 - rear clutch; 4 - cup; 5 - rear clutch hub; 6 - front cross of the satellites; 7 -...
Valve box replacement Removing Disconnect the wire from the negative battery terminal. Raise the car and put it on stands. Drain the oil from the automatic transmission. Remove the bottom and...
Removal and installation of an automatic transmission Removing Disconnect the wire from the negative battery terminal. Remove the air filter. Loosen the front wheel nuts. Disconnect the flexible speedometer drive shaft from...
Checking the performance of an automatic transmission Start the engine with the selector lever in position «R», leave it to idle until the temperature of the oil in the gearbox reaches 50-80°C. Chock the wheels and apply...
Operating pressure test Chock the wheels and apply the handbrake. Attach a tachometer and connect a pressure gauge to the outlet fitting of the working hydraulic system. Measure the operating...
Checking the working pressure cut-off Connect one pressure gauge to the outlet of the working hydraulic system and the other to the outlet of the oil pressure regulator. Disconnect the vacuum hose from the...
Checking the control pressure Connect a pressure gauge to the outlet fitting of the pressure regulator. Start the engine. Set the selector lever to position «D» and determine the value of the control...
Filling automatic transmission with oil Park the vehicle on a level surface and apply the handbrake. Remove the dipstick and wipe it with a hard, lint-free cloth. Pour oil through the dipstick tube into the...
Gear selector cable adjustment Remove the selector lever cover. Loosen nuts X and Y on the end of the selector cable. Set the selector lever to position «N» and check that the lock roller is in the...