Place chocks under the wheels and apply the handbrake.
Connect the tachometer.
Set the selector lever to position "D".
Press the brake pedal with your left foot.
Gently press the accelerator pedal with your right foot.
Once the engine speed stops increasing, record the tachometer reading and release the accelerator pedal.
Note: The accelerator pedal may be held down for no more than 5 seconds.
Set the selector lever to the "N" position and let the engine idle for a few minutes. Press the brake pedal, smoothly press the accelerator pedal and, when the engine speed stops increasing, record the tachometer reading and release the accelerator pedal.
Perform the same operations, sequentially setting the selector lever to positions "2", "1" and "R".
Compare the obtained values with the nominal test mode of the automatic transmission.
Using the table as a guide, evaluate the results of the automatic transmission performance test.