Car coloring Straightening and painting work with a body requires experience and knowledge of materials and processing methods. This is usually achieved only over many years of...
Elimination of stone damage Regular repair of minor damage to the paint pays off, as this can avoid the spread of rust and larger repairs. In case of small scratches and stone marks that have...
Body straightening / repair of rusty holes Small dents can be removed with a straightening hammer and an appropriate hand anvil, with rust holes on the body, it is recommended, depending on the size of the...
Preparing to paint a car 1. Wash the car before painting to avoid dirt inclusions. 2. Work only at temperatures above 12 degrees, but not in the open sun and not in strong winds. Rust removal 1....
Car body painting To avoid problems during painting, apply before painting "Primer" from the same manufacturer as the spray paint. Otherwise, the paint will bubble and wrinkle. Attention!...
Car wash Attention! In many areas, car washing in open areas is prohibited. 1. Wash a dirty car as soon as possible. 2. Remove dead insects before washing the car. 3. Use plenty...
Care of the lacquer coating Conservation As often as required, the clean washed and dried lacquer coating should be covered with a weatherproof preservative with a pore-closing and water-repellent...
Underbody protection and cavity preservation The entire bottom, including the rear wheel arches, is covered with protective mastic. Particularly dangerous areas in the front wheel arches are protected from stone...
Caring for upholstery fabric 1. Clean the upholstery with a vacuum cleaner or a not very soft brush. 2. Treat oil and grease stains with gasoline or stain remover. 3. The cleaner should not be...