Description of automatic transmission Automatic transmission - bottom view (FordProbe) 1. Gearbox support 2. Protective shield 3. Gearbox oil sump 4. Crossbar The vehicle models described in this manual are...
Tightening torques for threaded connections Type and amount of transmission fluid See subsection 2.1 Tightening torques, Nm Transmission sensor bolts 8 – 10 Gearbox mounting bolts and nuts: A (nuts) 75 – 105 IN...
Diagnostics of malfunctions of automatic transmission Preliminary check 1. Warm up the engine and transmission to normal operating temperature. 2. Check the transmission fluid level: A) if the level is too low, add fluid...
Gear shift lever — removal and installation Attention! The models described in this manual are equipped with airbags. Be sure to deactivate the air bag system before starting work to avoid sudden deployment....
Gearshift cable — removal and installation Removing 1. Remove the center console. 2. Remove the heating blower. 3. Remove the four screws for the gear lever position indicator and remove the indicator. 4....
Interlock system Models of cars in which automatic transmissions are installed are equipped with interlock systems. The interlock system consists of two subsystems: the gear lever lock...
Gearbox sensor Examination 1. Disconnect the sensor wire (the corner shows the location of the contacts in the contact socket of the sensor). 2. Set the gear lever in turn to each of...
Drive axle seals — replacement 1. Remove the axles. 2. Remove the old seals with a screwdriver or a special tool. 3. Install new seals.
Removal and installation of automatic transmission Location of gearbox and engine bolts (1993 4-cylinder models with 4EAT/GF4A-EL transmission) Location of gearbox and engine bolts (1993 and up 6-cylinder models with...