Steering System — General Description Location of steering parts 1. Horn cover; 2. Lock nuts; 3. Steering wheel; 4. Screws; 5. Steering column covers; 6. Harness connections; 7. Screws; 8. Bottom panel; 9....
Steering wheel — removal and installation 1. Disconnect the negative battery cable. 2. Remove the horn cover and trim, disconnect the horn wire (photo). Pull out the ornament to access the steering wheel cover...
Steering column — removal and installation 1. Disconnect the negative pole of the battery. 2. Remove the steering wheel ( Chapter 13 ). 3. Remove covers of a steering column and disconnect connecting plaits. 4....
Swivel fist and hub — removal and installation 1. Raise the front of the vehicle, secure it securely to the jack stands, and remove the front wheel. 2. Block the hub from rotating by inserting a screwdriver or...
Tie Rod End — Removal and Installation Tie Rod End and Steering Gear Boot Installation Parts 1. Tie rod end; 2. Locknut; 3. External collar of the cover; 4. Sealing cover; 5. Internal collar of a cover; 6....
Rack and Pinion Boot Seals — Replace 1. Rack and pinion seals protect the internal assemblies from water and dirt, and should be checked periodically for tears, splits, or other damage or wear. Damaged...
Bleeding power steering system 1. After any operation where the power steering pipes have been disconnected, the system must be bled to remove air from it and obtain proper steering performance. 2....