Headlight — removal and installation 1. Remove the grille cover (if equipped) and grill assembly ( Section 11 ). 2. Disconnect the negative cable from the battery. Type - headlamp Location of headlight...
Headlight adjustment Note: Holts Amber Lamp is useful for changing headlight colors to match mainland European regulations. It is important that the headlights are aimed correctly. If they...
Bulb replacement Front edge Turn signal and side marker lights Front turn and marker lights 1. Front side marker lens; 2. Front side marker lamp assembly; 3. Turn indicator lens; 4. Turn...
Bulb Test System — Precautions 1. Bulb test system (when installed) controls brake lights and taillights. The system uses a special relay (brake and reversing light checks) which senses the current...
Turn signal and alarm breaker — removal and installation 1. The general breaker of the turn signal and emergency stop serves both the turn signal and the emergency stop signal, warning by flashing light. It is located on the...
Castle lighting system — general description 1. On models equipped with this system, the driver's door lock and ignition switch lights up for approximately 20 seconds after the door handle is raised. 2. In addition...
Reversing lamp board — lens replacement Lock Lighting System Circuit Diagram Door handle switch attached to outside door handle Softening the adhesive with a hot air injector Push out the old diffuser with a...