Car doors and windows Mazda 626 (5)

Door trim panel — removal and installation
Removal 1. If necessary, remove the retaining clip using a cloth and remove the window handle. 2. Lift the door lock button. 3. Remove the inner motor opening handle...

Doors — removal, installation and adjustment
Removal and installation 1. Lower the window completely. Disconnect the negative battery cable. 2. Remove the door trim panel and water protection panel. 3. Disconnect...

Door lock, lock drum and handle — removal and installation
Door lock 1. Remove the door trim panel. 2. Disconnect the rods and connectors from the door lock. 3. Loosen the mounting screws (indicated by arrows) and remove the...

Door glass — removal and installation
Removal 1. Remove the door trim panel. 2. Lower the window completely. 3. Raise the glass slightly and unscrew the glass frame mounting bolt (indicated by the arrow). 4....

Window lift mechanism — removal and installation
Removal 1. Remove the glass. 2. Disconnect the wiring connector from the window motor on models with power windows. 3. Loosen the window regulator mounting nuts...

Trunk lid (Mazda 626 and MX-6 models)
Removal and installation 1. Disconnect any connectors or wires that may interfere with the trunk lid removal. 2. Mark the position of the hinge installation on the lid....

Trunk lid lock and drum (Mazda 626 and MX-6 models)
Removal, installation and adjustment Lock 1. Mark the installation position of the lock. 2. Disconnect the rod and connector from the lock. 3. Loosen the mounting bolts,...

Trunk lid/fuel filler flap release cables
Removal 1. Disconnect the cable from the trunk lid lock. 2. Remove the trunk trim panels to access the cables. Disconnect the cable from the throttle lock (indicated by...

Rear Door (Ford Probe Models) — removal and installation
Removal and installation 1. Open the back door. 2. Remove the mounting rivets and remove the upper trim panel from the door. 3. Disconnect the connection connectors...

Rear Door Lock and Lock Drum (Ford Probe Models)
Removal and installation Lock 1. Loosen the mounting screws and remove the rivets (indicated by arrows), remove the trunk trim panels. 2. Mark the installation position...

This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

More sections on repairs of other Mazda models
• Body: Doors and windows Mazda Familia 6 (1989-1994)
• Body: Doors and windows Mazda3 BK (2003-2009)
• Body: Doors and windows Mazda6 GG (2002-2008)
• Body: Doors, windows and locks Mazda 121 (3) (1996-2003)

Share with friends on social networks:

Link in different formats to this section

TEXTHTMLBB Code

Capella 5 (1991-1997)