Contents: Removal and installation ⇓ Adjustment ⇓
Removal and installation
1. Open the back door.
2. Remove the mounting rivets and remove the upper trim panel from the door.
3. Disconnect the connection connectors (indicated by arrows), disconnect the washer hose.
4. Disconnect the door support pillars.
5. Mark the position of the hinges on the door.
6. Unscrew the fastening nuts (indicated by arrows) and remove the door.
7. Installation is carried out in the reverse order of removal.
(The article is reprinted from the portal www.MazBook.ru)
Adjustment
To adjust the height of the lower edge of the rear door, adjust the position of the lock latch.