Removal and installation
Lock
1. Loosen the mounting screws and remove the rivets (indicated by arrows), remove the trunk trim panels.
2. Mark the installation position of the lock.
3. Unscrew the two mounting bolts (indicated by arrows) and disconnect the rods and cable.
4. Installation is carried out in the reverse order of removal.
Castle drum
5. Remove the right headlight.
6. Disconnect the lock rod and unscrew the mounting bolts (indicated by arrows).
7. Remove the lock drum.
8. Installation is carried out in the reverse order of removal.
[The original text can be found on: Mazbook.ru]