Hinges and locks — care Every 5000 km or every 3 months it is necessary to lubricate the hinges and locks of the doors, trunk and hood with a small amount of oil or a special grease for locks....
Windshield and Fixed Glass — Replacement Replacing these glasses requires special tools and equipment. We recommend entrusting this operation to the service station specialists.
Door trim — removal and installation Warning. Wear gloves when working inside doors to avoid scratching your hands from the sharp edges of the door panels. Removing 1. On manual window models, remove the...
Doors — removal, installation and adjustment Note. The doors are very heavy and inconvenient to install, so we recommend that you do this work with two people. Warning. Wear gloves when working inside doors to...
Door glass — removal and installation Warning. Wear gloves when working inside doors to avoid scratching your hands from the sharp edges of the door panels. 1. Remove the door lining and protective coating (...
Window regulator — removal and installation Warning. Wear gloves when working inside doors to avoid scratching your hands from the sharp edges of the door panels. 1. Remove the door lining and protective coating (...
Tailgate/Tailgate and Fuel Door Lock Cables 1. Remove the trunk lid lock and disconnect the cable from it (see paragraphs 22 and 25 ). 2. For access to cables of the lock of a luggage carrier and the hatch of a...
Tailgate Lock &Cylinder (Ford Probe) Tailgate lock 1. Open the tailgate and remove the rear luggage compartment trim panels (pic. 25.1). 2. Mark the position of the lock (to facilitate subsequent...
Trunk Lid and Tailgate Support Racks (Probe and MX-6) 1. Fully open the tailgate and lock it in this position. 2. Turn away bolts of fastening of the top end of a rack (pic. 26.2). In the MX-6 model, it is necessary to hold...