Warning. Wear gloves when working inside doors to avoid scratching your hands from the sharp edges of the door panels.
1. Remove the door lining and protective coating (see paragraph 15).
2. Lower the glass.
3. Raise the glass like this. so that it is possible to unscrew the bolt securing the glass bracket. Loosen and remove the bolt (pic. 18.3).
4. Put a rag under the glass (so as not to scratch the glass when removing), then unscrew the two bolts of its fastening (pic. 18.4).
5. Remove the glass from the door by lifting it up and outward.
6. Installation is made in sequence, return to removal.