Vehicle power and exhaust systems Mazda 626 (6)

Technical data of fuel and exhaust systems
Fuel system pressure Ford Probe models With the ignition on and the engine not running - 2.4-2.8 bar With the engine running - 2.1-3.1 bar Mazda models With the engine...

Basic information about fuel and exhaust systems
The vehicle's fuel system consists of a fuel tank, an electric fuel pump (located in the tank), fuel pump relay, fuel rail with injectors, pressure regulator, air...

Relieving pressure in the fuel system
Caution! Gasoline is highly flammable, so take all fire safety precautions when working with any part of the fuel system. Do not smoke, use open flames or portable pumps...

Fuel Pump/Fuel System Pressure Check
See the warning at the beginning of paragraph 2. Note: To check the fuel system pressure, you will need a pressure gauge that measures the operating pressure in the...

Fuel lines and connections — repair and replacement
Caution! Gasoline is highly flammable, so take all fire safety precautions when working with any component of the fuel system. See warnings at the beginning paragraph 2...

Fuel pump — removal and installation
Caution! Gasoline is highly flammable, so take all fire safety precautions when working with any component of the fuel system. See warnings in the non-chele paragraph 2...

Fuel tank level sensor ~ checking and replacing
Caution! Gasoline is highly flammable, so take all fire safety precautions when working with any component of the fuel system. See the warning at the beginning of...

Fuel tank — removal and installation
Caution! Gasoline is highly flammable, so take all fire safety precautions when working with any component of the fuel system. See the warning at the beginning paragraph...

Fuel Tank Cleaning and Repair — basic information
1. Repairs to the fuel tank and filler neck must be performed by a specialist with experience in such potentially dangerous work. Even after cleaning and flushing the...

Air cleaner — removal and installation
1. Disconnect the negative battery cable. Warning. If your vehicle's audio system is equipped with anti-theft protection, make sure you have the unlock code before...

Accelerator cable — removal, installation and adjustment
Removal and installation 1. Disconnect the negative cable from the battery. Caution: If your vehicle's audio system is equipped with anti-theft protection, make sure you...

Electronic Fuel Injection Control System — basic information
The engine fuel supply system with sequential distributed fuel injection consists of three subsystems: air supply, fuel injection and electronic control. The basis of...

Electronic fuel injection system check
Caution! Gasoline is highly flammable, so take all fire safety precautions when working with any component of the fuel system. See the warnings at the beginning of...

Throttle body — removal and installation
Caution: Allow the engine to cool completely before starting this work. 1. Disconnect the negative cable from the battery. Warning. If your vehicle's audio system is...

Fuel pressure regulator — removal and installation
Caution! Gasoline is highly flammable, so take all fire safety precautions when working with any part of the fuel system. See warning at beginning paragraph 2 . 1....

Fuel rail and injectors — removal and installation
Caution! Gasoline is highly flammable, so take all fire safety precautions when working with any part of the fuel system. See warning at beginning paragraph 2 . Removal...

Exhaust System Maintenance — basics
Caution: Allow the exhaust system to cool completely before working on it. When working under a vehicle, place it on secure supports. Caution! On all models described in...

This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

More sections on repairs of other Mazda models
• Power unit: Supply system Mazda Familia 6 (1989-1994)
• Power unit: Fuel system Mazda3 BK (2003-2009)
• Power unit: Fuel system Mazda6 GG (2002-2008)
• Power unit: Supply system Mazda CX-5KE (2012-2017)
• Power unit: Supply system Mazda 121 (3) (1996-2003)

Share with friends on social networks:

Link in different formats to this section

TEXTHTMLBB Code

Capella 5 (1991-1997)