Contents: Removal ⇓ Installation ⇓
Removal
1. If necessary, remove the retaining clip using a cloth and remove the window handle.
2. Lift the door lock button.
3. Remove the inner motor opening handle mounting screw and the mounting screw at the upper front corner of the door (indicated by the arrow).
4. Remove the handle from the door and disconnect the rod.
5. Remove the power window switch panel and disconnect the connector.
6. Loosen the mounting screws and remove the handle.
7. Remove the trim panel mounting screws and remove the trim panels (indicated by arrows).
Installation
8. Installation is carried out in the reverse order of removal.
Text taken from an online platform MAZBOOK