Removing
1. Remove the center console.
2. Remove the heating blower.
3. Remove the four screws for the gear lever position indicator and remove the indicator.
4. Disconnect the shift cable from the shift lever.
5. Squeeze the latch tabs and disconnect the cable from the shift lever housing.
6. Remove the air filter cover.
7. Remove the retainer cap (A) and disconnect the cable from the shift lever (IN) on the gearbox.
8. Disconnect the cable from the gearbox.
9. Remove the two nuts securing the cable grommet to the engine compartment baffle.
Installation
Cable installation is carried out in the reverse order of removal.
Adjustment
1. Place the shift lever in the park position (PARK).
2. Remove the lever position indicator panel.
3. Remove the retainer (A) and press the adjusting button (IN).
4. Set the shift lever on the gearbox to the park position and lock the shift lever by pushing in the adjusting button.
5. Put on the adjustment knob.
6. Install the remaining parts and check how the shift lever works.