MAZDA 323 since 10/89
1 - power window handle; 2 - overlay; 3 - door upholstery (manual power window); 4 - door upholstery (electric window regulator); 5 - inner door handle; 6 - seal; 7 - sealing film; 8 - adjusting motor of the central locking device / drive rod; 9 - door lock; 10 - outer door handle; 11 - fastening bracket; 12 - lock cylinder
Removing the door lock
1. Close the window.
2. To remove an internal upholstery of a door.
3. Disconnect the drive rods from the lock.
4. Unscrew the door lock and take it out through the hole in the door frame.
Installation
1. Lubricate the door lock at the points indicated by the arrows with universal grease.
2. Attach drive rods to the door lock.
3. Install the inner door trim.