General information about the heating system Outside air for the heating system is taken in under the windshield and fed into the passenger compartment by means of a fan. In this case, the air passes through the...
Removal and installation of the control unit Removing Disconnect the negative cable from the battery with the ignition off. Attention: This will erase the data from the electronic memory blocks. See instructions in...
Removal and installation of the fan motor Removing Attention: On vehicles with air conditioning, the refrigerant circuit must be opened to remove the fan (In workshop). Disconnect the negative cable from the...
Removal and installation of load resistance Removing Disconnect the negative cable from the battery with the ignition off. Attention: This will erase the data from the electronic memory blocks. See instructions in...
Removing and installing the side ventilation nozzle Removing Unhook the fan nozzle with a screwdriver in two places. Attention: Place a piece of paper under the screwdriver so as not to damage the instrument panel....
Removal and installation of the heater control valve Removing Disconnect the negative cable from the battery with the ignition off. Attention: This will erase the data from the electronic memory blocks. See instructions in...