Engine electrical equipment — device The location of the components of the starting and charging system in the engine compartment. 1 - starter, 2 - generator, 3 - battery.
Generator — removal and installation Note: these cars are equipped with a 70A generator (at 12 V). Removal and installation Attention: when the battery is connected, between the car body and the terminal...
Generator — disassembly and assembly Disassembly and assembly of the generator. 1 - generator cover on the drive side, 2 - generator pulley, 3 - rotor, 4 - front bearing, 5 - stator, 6 - rectifier block, 7...
Starter — removal and installation Note: These vehicles are fitted with a 2.2 kW starter. Vehicle check 1. Make sure the battery is fully charged. 2. Turn a cranked shaft a starter and be convinced that...
Disassembly and assembly of the starter Disassembly and assembly of the starter. 1 - traction relay, 2 - back cover, 3 - brushes and brush holder, 4 - starter winding, 5 - anchor, 6 - planetary gears, 7 -...
Glow plugs Vehicle check 1. Remove the glow plug rail. 2. Using an ohmmeter, measure the resistance between the glow plug lead and the cylinder head (weight). Rated resistance at...
Glow plug relay Removal and installation 1. Disconnect a wire from the negative plug of the storage battery. 2. Remove the glow plug relay as shown. 3. Install in reverse order....
Glow plug rail Examination 1. Disconnect a wire from the negative plug of the storage battery. 2. Remove the glow plug rail. 3. Visually check that the tire is not torn or bent. 4....