Car manual transmission Mazda BT-50 1

Checking the oil level and changing it
The procedures for checking the level and changing the oil in the gearbox are described in the chapter " Maintenance and general check and adjustment procedures ".

Neutral gear engagement sensor
Removal and installation 1. Disconnect the cable from the negative terminal of the battery. 2. Disconnect the neutral position sensor connector. 3. Remove the sensor. 4....

Gearbox assembly — removal and installation
1. Disconnect the cable from the negative terminal of the battery. Removal and installation of gearbox. 1 - gearbox and transfer case control lever handles, 2 - lever...

Gearbox assembly — precautions for disassembly and assembly
1. Before disassembling, clean the outside surface of the gearbox with a steam cleaner or solvent. Attention: Using compressed air to clean will cause dirt to spray and...

Upper cover and crankcase extension
Removal and installation of parts should be carried out using the assembly drawing "Top cover and crankcase extension". Upper cover and crankcase extension. 1 - bushing,...

Fifth gear and reverse gears
Removal and installation of parts is carried out using the assembly drawing "Fifth gear and reverse gear". Fifth gear and reverse gear. 1 - driven gear of fifth gear, 2...

Removal and installation gearbox shafts
Removal and installation of parts is carried out using the assembly drawing "Removal and installation of gearbox parts". Removal and installation gearbox shafts. 1 -...

Disassembly and assembly of gearbox shafts
Removal and installation of parts should be carried out using the assembly drawing "Disassembly and assembly of gearbox shafts". Disassembly and assembly of gearbox...

Gear shift mechanism
When removing and installing parts, refer to the assembly drawing "Gear shift mechanism". Gear shift mechanism. 1 - breather, 2 - oil deflector, 3 - locking ball, spring...

Checking gearbox components
1. Using a feeler gauge, measure the gap between the gear shift fork and the synchronizer sleeve. Gap: nominal - 0.05 - 0.40 mm maximum allowable - 0.5 mm If the...

This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

More sections on repairs of other Mazda models
• Transmission: Car gearbox Mazda Familia 6 (1989-1994)
• Transmission: Mechanical gearbox Mazda Capella 6 (1997-2005, petrol)
• Transmission: Mechanical gearbox Mazda3 BK (2003-2009)
• Transmission: Mechanical gearbox Mazda6 GG (2002-2008)
• Transmission: Mechanical gearbox Mazda CX-5KE (2012-2017)

Share with friends on social networks:

Link in different formats to this section

TEXTHTMLBB Code