2. (Models without electric window lift) Remove the window lift handle.
3. Remove the rear side door trim panel (see section "Interior trim").
4. Loosen the screws.
5. Remove the glass installation hole trim.
1 - finishing the hole for installing glass,
2 - screw.
6. Lift the door glass and unscrew the bolts.
1 - window lift mechanism (models with electric drive),
2 - window lift mechanism (models without electric drive),
3 - bolt.
7. Move the window lift mechanism rod towards the rear of the glass.
8. Carefully remove the window lift mechanisms through the access hole.
9. Lower the door glass and remove it.
10. Installation is carried out in the reverse order of removal.