2. Remove the instrument panel amplifier (see section "Dashboard").
3. Remove the lower finishes of the central pillars.
4. Remove finishings of back racks.
5. Remove the front and rear seats (see section "seats").
Floor finishing.
1 - piston,
2 - rear lower trim,
3 - piston,
4 - latch,
5 - floor finish,
6 - piston,
7 - insulating pad,
8, 9 - insulating adjustments of the instrument panel,
10 - hole finishing,
11 - insulating lining of the instrument panel,
12 - nut,
13 - insulating lining of the engine compartment.
6. Remove an arm of fastening of a back part of the central console.
7. Turn away bolts of the lower fastenings of seat belts.
8. Remove forward lateral finishings of salon.
9. Remove the duct (see chapter "Air conditioning, heating and ventilation").
10. Remove the foot rest trim.
11. Disconnect caps and remove finishing of a floor. When removing the floor finish, follow the assembly drawing "Floor finish".
12. Installation is made in an order, the return to removal. When installing, replace damaged caps with new ones.