Parts needed: Air filter element. Porous oil separator.
Removing
Loosen the screws and remove the air filter cover. The figure shows the filter on the Ford KA model.
Lift the air filter cover up and remove the filter element (1). The air supply hose must not be removed.
Wipe the filter housing with a cloth.
If the element is slightly dirty, carefully knock it out with the dirty side down. The oiled element must be replaced.
Attention! The filter element must not be cleaned with petrol or lubricated with oil. It can only be blown out with compressed air.
If there is, pull out the porous oil separator with pliers (1) in the air filter housing and replace it.
Installation
Insert a new filter element into the air filter housing. О Install the air filter cover and fasten it with screws.