- Air filter element. When purchasing a filter element, please note that the element required is in accordance with the vehicle model and engine power.
Caution! The air filter element must not be blown through with compressed air.
Carburetor engine
Removal
1. Unscrew the wing nut and loosen the clamps. Remove the cover and take out the filter element.
Installation
1. Insert the filter element. Put on the cover, snap the clamps and screw on the wing nut.
Injector engine
Removal
1. Loosen the hose clamp and disconnect the air inlet hose.
2. Unscrew the bolts securing the upper part of the air filter.
3. Remove the upper part of the air filter.
4. Remove the filter element.
5. Wipe the filter housing with a cloth.
Installation
1. Insert the new element into the air filter housing.
2. Install and screw the top part.
3. Connect the inlet hose and secure it with a clamp.
Diesel engine
Removal
1. Loosen the clamp and disconnect the air inlet hose.
2. Unscrew the air filter cover mounting bolts.
3. Wipe the filter housing with a cloth.
Installation
1. Insert the new element into the air filter housing.
2. Install and screw the cover.
3. Connect the inlet hose and secure it with a clamp.
(Article is based on website data: «MazBook»)