Contents: Removal ⇓ Installation ⇓
Removal
Mark the position of the front wheel relative to the hub so that you can then install the balanced wheel in its original position. Loosen the wheel nuts with the vehicle on the ground. Raise and support the vehicle from the front and remove the front wheel.
Detach the inner part of the wing from the front by unscrewing one bolt and unhooking it from the metal mount on top.
Unscrew the five mounting bolts.
Remove the inner part of the wing.
Installation
Insert the inner part of the wing and attach it at the top to the sheet metal mount.
[The original text can be found on Mazbook]
Tighten the six mounting bolts.
Install the front wheels according to the marks made earlier. Lightly lubricate the central seat of the disc with consistent grease beforehand. Do not lubricate the threads of the wheel studs. Tighten the wheel nuts. Lower the car and tighten the wheel nuts crosswise to a torque of 90 Nm.