Programming
The programming of the individual seat settings is only possible when the vehicle is stationary.
1. Set the seat to the desired position.
2. Pressing and holding the button «SET», simultaneously press one of the buttons 1–3 to produce a short beep.
Disconnecting the battery from the car's on-board network (e.g. during maintenance or other reasons) causes the programmed seat settings to be erased. In this case, reprogram the driver's seat memory.
Automatic seat adjustment to programmed position
Turn the ignition switch to position «LOCK» (blocking), open the driver's door, then press one of the buttons 1-3 that corresponds to the desired driver's seat customization.
– Activation of the automatic seat adjustment to the programmed position is also possible when the ignition is switched on (ignition switch turned to position «ON») and a closed driver's door.
To do this, press and hold down one of the buttons that corresponds to the desired seat setting.
The automatic seat positioning function is deactivated in the following cases:
- by pressing any seat adjustment button;
- when the car is moving or when starting the car;
- when you press the same button 1-3 again or the button «SET».