Warning! The noise when pulling out the belt is functional. If there is unusual noise, the seat belt can only be replaced. Under no circumstances should oil or grease be used to eliminate noise. The automatic system should not be disassembled, as this could cause the compressed spring to jump out. Risk of accident.
1. Pull out the seat belt completely and check for broken fibers. Damage may be caused by the belt being pinched or a burning cigarette. In this case, the belt should be replaced.
2. If there are worn areas and the fibers are not torn, the seat belt does not need to be replaced.
3. Check the belt for heavy movement, make sure it is not twisted, if necessary, remove the cover on the middle pillar of the body.
4. If the automatic belt does not work, the belt should be replaced.
5. Clean belts only with soap and water, never use solvents or chemical cleaners.