Programming
The individual seat setting can be programmed using a wearable card that is included with the system «Advanced Key», or using the folding key remote control.
Seat settings can only be programmed under the following conditions:
- ignition switch is in position «LOCK» (blocking), while the auxiliary key / folding key must be removed from the ignition switch;
- the driver's door is open.
1 Move the seat to the desired position. For a description of the driver's seat adjustment in various directions, see the following pages: longitudinal seat adjustment, backrest tilt adjustment, seat height and cushion tilt adjustment,
2. If the driver's door is closed, open it.
3. Pressing and holding the button «SET», simultaneously press and hold the unlock button on the remote control until a short beep sounds.
Automatic adjustment of the driver's seat to a programmed position
Unlock the door locks using the remote control included with the system «Advanced Key», or using the folding key remote control. Then open the driver's door.
Clearing the memory of a device to be programmed
When the following conditions are met, press and hold the lock button on the remote control to hear a short beep.
- The ignition switch is in position «LOCK» (blocking), while the auxiliary key / folding key must be removed from the ignition switch;
- The driver's door is open.
Clearing the memory of the driver's seat programmable device is also carried out in the following cases:
- when changing the codes of the electronic anti-theft system (immobilizer).
- when the battery is disconnected from the vehicle's on-board network (during maintenance or other reasons).